Tree Weasel / 152cm
Handmade in Ventura, Calif.
SNOW SURF / ALL MOUNTAIN
152cm / 156cm Rec Flex: 7/10
Profile: Early rise rocker with camber between the feet
Sidecut: Progressive
Who it's for: Intermediate to advanced
What it does: Classic Short/Wide volume shifted shape. Big rockered nose with shortapered tail for float in deep powder and is a carves extremely well due to the large sidecut giving the free weasel an extra gear - it's quite nimble considering the width.
Notes: Order your daily driver length + - 2cm for extra surface area for deep
Length - The length measured from the tip of the snowboard to the tail. This is a very traditional way to know what to expect from a snowboard but it doesn’t tell the whole story.
Nose Width - The width measured at the widest point of the nose of your snowboard. This is also typically the widest part of the board. Knowing how wide the nose of your board is will give you some clues as to how much float you can expect from your board, and how it might feel rolling edge to edge.
Waist Width - This measurement typically tells you the width of the narrowest part of the board. This is usually found in between the bindings in the deepest part of the sidecut depending on how much taper the board has.
Effective Edge - When you put your board up on rail there will be two points making contact with the snow, one towards the nose and one towards the tail. Effective edge measures the length of the rail making contact with the snow. Generally, the more effective edge you have the greater edge hold you will have.
Taper - This is the difference between the nose width and the tail width. Boards with more taper will usually have a looser ride feel (less grabbiness, more tail sink in powder, also more likely to wash out on firm)
Sidecut Radius - In its simplest form, the bigger the side cut the bigger the turn it’s designed to make. Rider inputs can make pretty much any snowboard do anything they want, that being said shorter (smaller) side cuts lend themselves to tighter turns and longer (bigger) sidecuts lend themselves to more drawn out turns.
Rear Underfoot Width - The width of the snowboard under the rear inserts on the board. Use this measurement to make sure you won’t get toe/heel drag with your setup.
Front Underfoot Width - The width of the snowboard under the front inserts on the board. Use this measurement to make sure you won’t get toe/heel drag with your setup.
Rider Weight - Your weight with all of your anticipated gear on. Rule of thumb for resort riding, your naked body weight plus 10 pounds. For splitboarding, add 25 pounds.
